Black Port Authority S608 Easy Care dress shirt with example embroidery above the pocket

How to Measure Dress Shirt Size Before Ordering for Your Team

To measure dress shirt size, first identify whether the chart describes a person's body or a finished shirt. Use body measurements with a body size chart, and measure a well-fitting shirt when the chart gives garment dimensions. Mixing the two is one of the easiest ways to order the wrong size for a team. Before taking out the tape, open the chart for the shirt you intend to buy. Look for the words body measurements, garment measurements, chest width, sleeve length, and any diagram showing the measuring points. Save the chart with the product code so you can return to the same reference. This first step prevents a surprisingly common mix-up: someone measures a shirt flat, another measures around their chest, and both enter the number in a column labeled chest. The numbers may be accurate but still cannot be compared. A useful measurement always includes what was measured, how it was measured, and the unit used.

A size label is a starting point, not a measurement. Different brands and cuts can use different dimensions for the same letter size. Before ordering embroidered dress shirts for your team, collect the measurements that the exact product chart asks for. For a team order, choose the approved products before collecting final sizes. If the style changes later, have wearers review the new chart instead of copying the old selections automatically. A medium in one button-front shirt can have a different collar, sleeve, or body shape from a medium in another. The custom dress shirts collection is a good starting point for the shortlist, but the product-specific chart should guide the final selection. If employees can choose among several approved cuts, attach the correct link to each option. Keeping product and size together makes the roster much easier to check.

Body size and shirt size are different measurements

A shirt needs room around the body for movement and the intended fit. That extra room is already reflected in the relationship between a manufacturer's body chart and its garment specifications. Do not add an arbitrary allowance to a body measurement before comparing it with a body chart. That room is often called ease. It allows a woven shirt to sit around the body and accommodate movement rather than matching every body dimension tightly. How much room feels right depends on the cut and intended appearance, but a buyer should not invent an allowance and add it to every measurement. Follow the manufacturer's instructions for the chart being used. A body chart already relates body measurements to the designed garment. A garment chart lets you compare the finished item with a shirt you like. Use the first to identify a candidate and the second to investigate fit details where needed. They answer related questions through different measurements.

Here is a real example from the Port Authority W100 size and measurement sheet. Its medium body-size chest range is 38–40 inches, while its finished shirt chest width is 23 inches measured flat. Doubling that flat width gives approximately 46 inches around the shirt. That does not mean medium is intended for a 46-inch body chest. Suppose a wearer measures within the medium body-chest range in that example but dislikes the room through the waist in the sample. That does not automatically mean the chest measurement was wrong. The issue may be the shirt's cut below the chest. Trying a smaller size could reduce shoulder or collar comfort while leaving the underlying shape preference unresolved. Compare the fit of another approved model and check its measurements. This is the value of separating size from cut: it gives you more useful options than repeatedly moving up or down a letter. Keep the numerical example tied to W100, because another shirt can use a different relationship between body and finished dimensions.

Swipe the table sideways to see all columns.

Chart wording What to measure Avoid this mistake
Body chest / bust Around the fullest part of the body, following the chart's instructions. Comparing a flat shirt width directly with a body circumference.
Garment chest width Across a shirt laid flat, at the specified point below the armholes. Assuming it is a circumference or stretching the fabric while measuring.
Body sleeve / arm length The route specified by the chart, often center back of neck to wrist. Using a shoulder-to-wrist measurement with a center-back chart.
Garment neck or sleeve The finished shirt, using the manufacturer's stated endpoints. Substituting a body measurement without checking the instructions.

How to take body measurements

Use a flexible measuring tape and, ideally, another person to help. Wear a light layer, stand naturally, and keep the tape level where required. Record inches or centimeters clearly; do not mix units within the order sheet. Gather a flexible tape, a firm flat surface for garment measurements, the product chart, and a place to record results. Avoid using a stretched or damaged tape. Take each measurement twice with the same method; if the results differ noticeably, check position and posture before choosing a number. Stand naturally and resist the urge to hold in the stomach or pull the shoulders back into an unusual pose. The shirt needs to fit the person during a normal day. Record fractions or decimals consistently and label inches or centimeters. A clean note such as body chest, 40 inches is more useful than a bare number copied into a message.

1. Chest or bust

Measure around the fullest part with arms relaxed. Keep the tape level and comfortably against the body, without tightening it or adding guessed extra room. Compare that number with the body chart for the chosen style. Have the tape sit level around the fullest part of the chest, following the selected chart's instructions. A helper can see whether it slopes across the back. Keep the arms relaxed and breathe normally; pulling the tape tight produces a smaller number without creating a better fit. If the chart asks for additional body measurements, collect those separately instead of assuming chest alone will describe the entire shirt. For some wearers, the waist or hip area may be the part that determines comfort when seated or tucked in. Use the measurements the manufacturer provides and identify the dimension that needs attention rather than forcing every fit question through the chest size.

2. Neck

Measure around the base of the neck where the collar sits, following the product chart's instructions. Record the actual measurement and use the manufacturer's sizing guidance. If the top button must close comfortably for work, check that fit on a sample rather than judging the shirt only with the collar open. Collar comfort deserves its own check when the shirt will be worn fully buttoned. Follow the chart's method around the base of the neck and record the actual result. Then try the intended collar position on a sample, especially if a tie or another required layer is part of the outfit. A shirt that feels fine with the top button open may be unsuitable for a role that requires it closed. Avoid a universal finger-width rule unless it is part of the manufacturer's instructions; collar shape and personal comfort vary. If the chest fits but the collar does not, another cut or sizing system may be more useful than increasing the whole shirt until the neckline works.

3. Sleeve length

Follow the route shown by the brand. For example, SanMar's W100 body instructions use the center back of the neck, across the shoulder and elbow to the wrist, with the hand on the hip. A shoulder-seam-to-wrist measurement is shorter and cannot be substituted into that chart. Sleeve measurements are particularly easy to mix up because brands can use different starting points. A measurement beginning at the center back of the neck includes distance across the shoulder that a shoulder-seam measurement omits. Read the diagram and follow the route around the bent arm where instructed. Keep the tape against the path without pulling it into a shortcut. Record the method beside the number if you are comparing several garments. Also check where the cuff sits during ordinary reaching and seated work. The sleeve should be assessed in use, not only with the arms hanging straight down. A longer body size is not always the best solution when sleeve length is the main issue.

How to measure a shirt that already fits

When the chart provides finished-garment measurements, start with a buttoned shirt laid flat on a firm surface. Smooth it gently without stretching it. Use a shirt with the fit the wearer actually wants for work. Choose a reference shirt that fits the way the wearer wants the new work shirt to fit. Button it, empty the pockets, lay it flat, and smooth folds gently. Follow the supplier's stated position for chest width, body length, and sleeves. A flat chest measurement often runs from one underarm area to the other, but the exact measuring point should come from the chart. Keep the shirt relaxed rather than stretching it to reach a preferred number. If the reference is old or has been washed many times, note that condition. It is still useful, but its current dimensions may differ from when it was new. A photo of the tape placement can help resolve a later question.

  • Chest width: measure across at the exact point named in the chart. The W100 specification uses one inch below the armhole.
  • Neck: if requested, use the manufacturer's endpoints; the W100 finished-shirt method measures from the center of the collar button to the center of the buttonhole.
  • Sleeve: follow the same route used in the garment chart, rather than assuming every brand starts at the shoulder seam.
  • Body length: check the specified start and end points. A measurement from the high point of the shoulder is not interchangeable with one starting at the center back collar.

Finished-garment dimensions are a comparison tool, not a guarantee that two shirts will feel identical. Fabric stretch, darts, shoulder shape, and the cut through the waist also influence fit. A measurement match narrows the choice; a fitting reveals how the whole pattern behaves. Two shirts with similar chest widths can differ through the shoulders, waist, armholes, or hem. Fabric also changes the experience. Our poplin versus twill guide explains the weave comparison, while the chosen product's stretch and care features need their own review. If the shirt will be worn under a jacket, try that combination too. A sleeve or collar that feels comfortable alone may feel crowded under another layer. Measure consistently, then use normal movement to decide whether the complete outfit works for the role.

Black Port Authority S608 Easy Care dress shirt with example embroidery above the pocket
Check the S608 Easy Care shirt's own size chart before collecting sizes. Catalog photo; example decoration shown.
Port Authority® Ladies Long Sleeve Easy Care Shirt Embroidery; catalog photo with example decoration
The L608 offers a different cut; use its measurements rather than converting sizes from the S608. Catalog photo; example decoration shown.

Build a useful team size sheet

For a simple order, your coordinator usually needs each person's approved style, color, size, and quantity. Employees can use measurements privately to make that selection. If you collect measurements for a fitting, limit access to the people helping with the order. A practical roster can contain employee name, exact model, color, confirmed size, quantity, and approval status. Personal measurements can stay with the wearer unless the organizer needs them to help resolve a question. Separate estimated selections from confirmed ones so an early guess is not mistaken for a final order. If someone cannot attend a fitting, send the chart and instructions together and ask them to flag uncertainty before the deadline. Keep the form simple enough that people complete it accurately. A long list of unexplained measurements can create more confusion than a shorter process that clearly connects each person to the product they have approved.

Swipe the table sideways to see all columns.

Order field Example or instruction
Employee or order identifier Use the identifier needed for distribution.
Exact style W100, S608, L608, or the selected product code.
Color, size, quantity Record each explicitly; avoid “same as last time.”
Chart checked Confirm the employee used that exact style's chart.
Sample tried Record the sample style and size, plus the final choice.
Special fit issue Flag sleeve, collar, or cut questions for resolution before decoration.

Finish with a movement check

Have the wearer sit, reach forward, and bend both elbows. Check for pulling between buttons, tightness through the upper back, and sleeves that become uncomfortable in a normal working position. Test the intended undershirt and jacket, and decide whether the shirt will be tucked in. Run the same short fit test for everyone: button the shirt as intended, sit, reach forward, bend the elbows, and check the collar. Look for gaps between buttons, pulling across the upper back, or a hem that comes untucked during ordinary movement. Try the actual undershirt and any company jacket that will be worn over it. Ask the wearer to describe the problem precisely. Tight across the back is different from too long through the body, and the solution may be a different cut rather than a different size. If the uniform will be worn untucked, evaluate that appearance and coverage deliberately instead of assuming every dress-shirt hem is intended for it.

If one size solves the chest fit but leaves the collar or sleeves unsuitable, compare another cut instead of repeatedly sizing up. The S608 Easy Care, L608 Easy Care, and W100 Carefree Poplin are separate styles with their own fit information. Use a simple troubleshooting approach. If the collar works but the body is much too roomy, compare another cut. If the body fits but the sleeve is short, check available sleeve or tall options where the product offers them. If the front pulls only when seated, review the relevant body dimensions and intended fit rather than judging the shirt from a standing photo. The polos versus dress shirts guide can also help when the role would allow a different shirt category. The goal is a uniform people can move in comfortably. Repeatedly changing size labels without identifying the problem usually makes the decision harder.

Common dress shirt sizing questions

Should I order my usual T-shirt size?

Use the dress shirt's chart instead. A woven button-front shirt may allow less stretch than the T-shirt you are comparing it with. A favorite T-shirt can tell you something about preferred looseness, but it is a weak basis for selecting a woven button-front shirt by label alone. Knit construction, collar requirements, and the cut through the body create different fit considerations. Use the dress shirt's own chart and, if possible, a similar button-front reference garment. If the team prefers the movement and feel of knit shirts, compare the custom polo options before finalizing the uniform policy. That is a product decision to make openly. It is more useful than asking a dress shirt to behave exactly like a casual tee simply because both carry the same letter size.

What if someone falls between sizes?

Check the brand's guidance and try a sample when possible. The right choice depends on the cut, where the measurement falls, and the desired fit; there is no universal rule that always works. When a measurement falls between sizes, look at the whole fit picture. Which dimension is close to the boundary? Will the shirt be tucked, fully buttoned at the neck, or layered under a jacket? Does the wearer prefer a closer or more relaxed appearance? Use the manufacturer's guidance and compare samples where practical. A larger size may provide room but also change sleeve length and body proportions; a smaller one may look tidy while restricting movement. If neither works, another approved style may be the better answer. Decide before embroidery, when the garment selection can still be reviewed without involving a finished personalized item.

Should we size everyone before choosing the fabric?

Choose the exact style first, then collect final sizes against its chart. If you are still deciding, read poplin vs. twill dress shirts and compare the options in our polos and dress shirts collection. After sizes are confirmed, keep the roster with the product codes and approved logo details. A correctly fitting shirt still needs a suitable decoration position around the pocket, placket, and seams. The logo placement guide explains the questions to include in that approval, with each dress-shirt model reviewed on its own construction. Once the order arrives, share the care label information and any decoration instructions. The embroidered apparel care guide can support that handoff. For future orders, reuse the process and current product information, rather than assuming every employee will always want the same size in every replacement style.

Leave a comment

All blog comments are checked prior to publishing