Model wearing black Carhartt CT104050 Washed Duck Active Jac with example chest embroidery

Do Carhartt Jackets Run Big? A Sizing Guide for Team Orders

Do Carhartt jackets run big? Some styles are intentionally roomy, which can make them feel large compared with a fitted casual jacket. But “order one size down” is a poor rule for a team order. Carhartt uses different fits, and the layer worn underneath changes how the jacket feels. A better question is which part feels large. Extra room at the waist, a broad shoulder, a long sleeve, and space for a sweatshirt are different fit observations. A person accustomed to a slim casual jacket may interpret useful layering room as oversizing, while someone who works in several layers may need that space. Start with the intended job and normal outfit, then compare the exact model's chart. This turns a vague brand-size question into a practical decision. For a company order, that distinction matters because one rule applied to the whole team can create several different problems: tight shoulders for one person, short sleeves for another, and unnecessary bulk for a third.

The useful answer: Start with the exact style number and its size chart. A loose-fit Carhartt Active Jac and a relaxed-fit Crowley softshell should not be treated as the same cut. Check body measurements, intended layers, sleeve length, and movement before approving embroidered garments.

Loose fit and relaxed fit are different starting points

The Carhartt Washed Duck Active Jac CT104050 is listed as loose fit. The Carhartt Crowley Soft Shell CT102199 is listed as relaxed fit. Those labels describe the garment’s intended shape; they are not instructions to automatically change your usual size. Fit labels are useful context, but the model's measurements and construction still do the detailed work. Two jackets described as relaxed can differ in lining, hem shape, sleeve design, and intended use. Keep the product code attached to every size recommendation and avoid transferring advice from a retail review of another style. If an employee likes a Carhartt jacket they already own, ask for the model information on its label and what they usually wear underneath. That reference can help narrow the selection, but it should not replace the current chart for the new product. Similar branding does not establish identical dimensions across generations or garment types.

Swipe the table sideways to see all columns.

Style Listed fit What to check during a fitting
Washed Duck Active Jac CT104050 Loose Room over work layers, shoulder movement, and ribbed hem position
Crowley Soft Shell CT102199 Relaxed Chest and back comfort while reaching; hem and cuff adjustment
Rain Defender Soft Shell CT106438 Relaxed Fit with intended layers and coverage while moving
Storm Defender Shoreline CT104670 Loose Room for layers under the rain shell and comfortable hood movement
Model wearing black Carhartt CT104050 Washed Duck Active Jac with example chest embroidery
The loose-fit Active Jac should be assessed over the layers your team expects to wear. Catalog photo; example decoration shown.
Black Carhartt Crowley softshell showing example embroidery opposite the chest pocket
The relaxed-fit Crowley is a different construction and should have its own size check. Catalog photo; example decoration shown.

Step 1: measure the person

Use a flexible tape and follow the measuring directions attached to the exact product chart. For a chest measurement, keep the tape level around the fullest part of the chest with arms relaxed. It should sit comfortably without being pulled tight. Take the measurement over the type of light clothing specified by the chart and avoid adding an arbitrary allowance unless the manufacturer instructs you to do so. Stand naturally, breathe normally, and have another person help keep the tape level when practical. A twisted or sloping tape can produce a misleading number. Record the result rather than rounding it toward the size you hope to order. If you repeat the measurement and obtain different figures, check the tape position and method before choosing between them. The goal is a consistent body measurement that can be compared with the chart, not a number adjusted to match someone's usual letter size.

Record the measurement in inches and keep it separate from the person’s preferred size. “Usually large” is useful context, but an actual measurement gives you something consistent to compare. Have each employee check the chart for their selected style rather than borrowing a coworker’s result. Keep measurement information private within the ordering process. An organizer usually needs the confirmed product and size, while the wearer can use the chart to assess personal measurements. If additional details are needed to resolve a fit question, share them only with the people helping make that decision. For a remote team, provide the exact product link and an uncropped chart so measurement definitions remain visible. Ask employees to flag uncertainty rather than guessing silently. A short clarification before production is much easier to manage than a finished jacket that was selected from the wrong chart or a size copied from a previous T-shirt order.

Step 2: distinguish body size from garment measurements

This is where many jacket orders go wrong. A body size chart describes the person the size is intended to fit. A product measurement chart describes the finished garment. A flat chest width is neither a body circumference nor a reason to size down until the numbers match. Ease is the room designed between the body and the garment. It allows for movement and, depending on the style, additional layers. Matching a jacket's finished circumference directly to a person's chest circumference can remove the space the pattern was designed to provide. That is why a body chart and a garment chart can show different numbers without contradicting one another. Use the body chart to identify a candidate size, then use garment measurements to compare with a suitable jacket or investigate a specific fit issue. Treat those charts as complementary tools. Neither should be reduced to a single number without its measuring method and intended meaning.

For example, the published CT104050 chart lists a large for a body chest of 42–44 inches. Its separate product measurement lists a 25½-inch flat chest width. Doubling that width gives an approximate garment circumference, but it includes the jacket’s intended ease and does not turn it into a 51-inch body-size recommendation. Work through that example carefully: the large size is associated with a stated body-chest range, while the flat width describes the garment laid out for measurement. The difference includes the construction and intended room of that jacket. It does not mean the manufacturer accidentally labeled a much larger body size as large. When comparing another model, repeat the process with its own chart rather than applying the same difference. A shell, a lined work jacket, and a shaped softshell can use different patterns. If the resulting fit still feels wrong, investigate the cut, layering, and other dimensions instead of trying to force every garment into one arithmetic rule.

If you compare with a jacket you already own, zip it, lay it flat, and use the supplier’s stated measuring points. Compare flat width with flat width and sleeve length with the same sleeve-length method. Do not compare a shoulder-to-cuff measurement with one that starts at the center back of the neck. Choose a reference jacket that serves a similar purpose. A fitted blazer or lightweight running layer may not be a useful template for a lined work jacket. Empty the pockets, fasten the front as directed, and lay it flat without stretching. Follow the supplier's measuring points for chest, body length, and sleeve. Note whether the reference garment has been heavily worn or washed, since its current measurements may differ from when it was new. Photograph the tape position if a measurement needs review. This makes the comparison easier to understand and prevents someone from interpreting a center-back sleeve measurement as a shoulder-seam measurement.

Step 3: try the intended layers

A jacket that fits over a thin shirt may feel different over a sweatshirt. Conversely, ordering up “for layers” can create unnecessary bulk when the chosen style already includes room for them. List the realistic layers rather than preparing for every imaginable outfit. If employees normally wear a polo and sometimes a medium-weight sweatshirt, use that combination. If a heavy hoodie is never part of the uniform, fitting over one can encourage unnecessary room. Conversely, trying the jacket only over a thin tee may miss a genuine winter layering requirement. Our hoodie fabric-weight guide helps explain why sweatshirts with the same general name can add different amounts of bulk. Select the intended inner layer first where possible, then evaluate the jacket over it. The two garments need to work together during normal movement.

Use a sample fitting where possible. Wear the normal work shirt and the thickest layer that is realistically part of the uniform. Zip the jacket fully. Check that the wearer can breathe comfortably, cross their arms, reach forward, and sit without strong pulling at the zipper or shoulders. Use a repeatable fitting sequence so different employees are evaluating the same things. Stand with the jacket zipped, reach forward as if using a steering wheel, cross the arms comfortably, sit in a chair, and raise the arms within an ordinary range of movement. Notice pulling at the back, chest, zipper, or underarms. Check whether the hem and cuffs remain appropriate for the task. This is a comfort assessment, not a substitute for any workplace clothing requirements. If equipment or protective clothing is part of the job, the responsible person should assess compatibility. A jacket can fit well in isolation and still be unsuitable for a required combination.

If the body feels too large but the sleeves are correct, investigate the model’s cut before automatically choosing a smaller size. If the body fits but the sleeves or overall length are short, investigate a tall option rather than solving length with extra width. Separate width, length, and shape in the feedback. 'The body is loose but the sleeves are right' suggests a different investigation from 'the chest is tight and the sleeves are short.' The first may point toward another cut; the second may require a different size or model. A smaller size often changes several dimensions at once, so it can solve one issue while creating another. Ask the wearer what happens during movement, not only how the jacket looks standing still. If the selected model cannot meet the important dimensions comfortably, compare alternatives in the custom jackets collection instead of treating a poor compromise as the only option.

Step 4: consider regular, tall, and women’s fits separately

The Carhartt Tall Washed Duck Active Jac CTT104050 provides a separate option for team members who need a different length. Compare its measurements with the regular model; a tall size is not simply a larger standard size. Compare regular and tall measurements directly for the model under consideration. Look at body and sleeve length, along with any other dimensions the chart provides. Avoid choosing tall based on height alone; arm length, torso proportions, and preferred coverage also matter. A person can need more sleeve length without wanting much additional width. Have the wearer try the intended layers and check the hem while seated and reaching. Keep regular or tall as an explicit field in the order roster, since an omitted designation can lead to the wrong variant even when the letter size is correct. A future reorder should repeat the full size description.

The Carhartt Women’s Washed Duck Active Jacket CT104053 also has its own fit and chart. Do not convert a men’s medium to a women’s medium, or assume one universal conversion works across the team. Check the relevant bust, hip, sleeve, and garment measurements provided for that style. For the women's style, use the measurements and shaping described on its own chart. Check how the jacket fits through the relevant body areas with the intended layers, and allow the wearer to choose from the approved cuts that work for them. Do not rely on a universal men's-to-women's conversion or assume that the same letter label means the same dimensions. If the company offers several fits, identify them clearly in the ordering form and attach the correct product link to each choice. Coordinated branding can remain consistent across different patterns. Comfortable fit is a better basis for a uniform than assigning everyone to a model by habit.

Use a size list that prevents avoidable mistakes

Build the order sheet with one line per person and fields for style number, color, size, regular or tall, and fit approval. Add a note for the layer used during the fitting. This avoids an ambiguous list of names followed only by “L” or “XL.” Add a status column to distinguish estimated size from confirmed size. An early roster often contains guesses made before samples arrive, and those guesses can accidentally become the final order if the sheet lacks a clear approval stage. Record the sample model, selected size, layer used, and any unresolved issue. For people who cannot attend, note whether the choice was based on measurements or a comparable garment. Set a deadline for resolving questions and identify who can approve a change. This keeps the process moving without treating an unanswered message as confirmation. Once selections are final, save a clean version with the artwork approval and order details.

Before decoration, have employees confirm their own selections and check that every requested size exists in the chosen color. Keep the approved list with the artwork proof. Fit questions are much easier to resolve before embroidery than after a finished jacket arrives. Check the complete combination of model, color, and size against current availability. A size offered in one color or fit may not be offered in another, and a similar jacket should not be substituted automatically. If a change is needed, explain the differences and revisit the relevant measurements before approval. For a uniform program that also includes pants, the Carhartt pants sizing guide provides a separate process for waist, inseam, and cut. Do not use a successful jacket size to guess the rest of the outfit. Each garment should be selected on the measurements and features that matter to its own fit.

Common questions

Should I size down in a loose-fit Carhartt jacket?

Only if the exact measurements and a fitting support that choice. Loose fit is intentional room, so sizing down by habit can reduce shoulder movement or sleeve length. A deliberate size-down decision can be appropriate for an individual after a fitting, but it should remain an individual decision. Confirm that the smaller size still provides comfortable movement, adequate sleeve and body length, and room for the intended layers. If those checks fail, a different cut may be a better route to a cleaner silhouette. Avoid promising that normal wear or washing will transform an unsuitable size into the desired fit. Choose the garment that works before decoration and follow its care instructions afterward. That approach is more dependable than ordering a size based on an online generalization and hoping the remaining fit problems resolve themselves.

Should I order a larger size to wear a hoodie underneath?

Try the hoodie under the jacket first. Some styles already provide useful layering space. Check movement and the chart before changing sizes. If the hoodie is part of the company kit, select it deliberately and try the actual style beneath the jacket. Hood shape, collar height, sleeve bulk, and body length can all affect comfort. Our crewneck versus hoodie guide can help decide whether a hood is useful for the role or whether a simpler neckline would layer more comfortably. Also consider how the inner garment's hem sits relative to the jacket. A visually coordinated outfit still needs to move well and provide the coverage the wearer expects. Record the chosen combination so the next order does not quietly replace the inner layer with a substantially different one.

Can one Carhartt size chart cover our entire order?

Use the chart for each model and fit. A mixed order of softshells, insulated jackets, regular sizes, and tall sizes needs separate checks. For mixed outerwear, group the roster by exact model and provide a separate chart for each group. This reduces the risk of someone selecting a softshell size from the insulated jacket's measurements. Keep the logo proofs separate as well, because pockets and usable chest areas can differ. Our softshell versus fleece comparison helps explain why a company may intentionally offer several constructions. The organizing principle should be consistent requirements and branding, with appropriate fit for each piece. A mixed order is manageable when the product code, chart, size, and artwork all stay attached to the same line item.

What if someone is between sizes?

Compare the two sizes in the chosen style if possible. Consider the intended layers and preferred room, then check sleeve and body length rather than choosing by chest alone. When two sizes remain plausible, compare both using the most demanding normal layer and movement in the brief. Ask which feels comfortable without excessive pulling or unwanted bulk, then inspect sleeves and hem. If neither works, widening the product shortlist can be more productive than repeatedly debating the same two labels. Weather requirements also belong in that decision: the Rain Defender versus Storm Defender guide explains why changing to a better-fitting jacket can also change the type of rain protection. Keep fit and function connected so solving one issue does not accidentally remove a feature the team needs.

Still choosing a work jacket? Read DRI DUCK vs. Carhartt. For different weather requirements, see Rain Defender vs. Storm Defender or browse our custom jackets collection.

Measurement example: Carhartt CT104050 specification and measurement sheet. The numerical example applies to that model only; always recheck the selected product’s chart before ordering.

Leave a comment

All blog comments are checked prior to publishing